In computing, C ( like the letter C) is a general-purpose programming language initially developed by Dennis Ritchie between 1969 and 1973 at Bell Labs. Its design provides constructs that map efficiently to typical machine instructions, and therefore it found lasting use in applications that had formerly been coded in assembly language, most notably system software like the Unix computer operating system.
C is one of the most widely used programming languages of all time, and there are very few computer architectures for which a C compiler does not exist.
Before there was an official standard for C, many users and implementors relied on an informal specification contained in a book by Ritchie and Brian Kernighan; that version is generally referred to as “K&R” C. In 1989 the American National Standards Institute published a standard for C (generally called “ANSI C” or “C89”). The next year, the same specification was approved by the International Organization for Standardization as an international standard (generally called “C90”). ISO later released an extension to the internationalization support of the standard in 1995, and a revised standard (known as “C99”) in 1999. The current version of the standard (now known as “C11”) was approved in December of 2011.
The initial development of C occurred at AT&T Bell Labs between 1969 and 1973; according to Ritchie, the most creative period occurred in 1972. It was named “C” because its features were derived from an earlier language called “B”, which according to Ken Thompson was a stripped-down version of the BCPL programming language.
The origin of C is closely tied to the development of the Unix operating system, originally implemented in assembly language on a PDP-7 by Ritchie and Thompson, incorporating several ideas from colleagues. Eventually they decided to port the operating system to a PDP-11. B’s inability to take advantage of some of the PDP-11’s features, notably byte addressability, led to the development of an early version of C.
The original PDP-11 version of the Unix system was developed in assembly language. By 1973, with the addition of struct types, the C language had become powerful enough that most of the Unix kernel was rewritten in C. This was one of the first operating system kernels implemented in a language other than assembly. (Earlier instances include the Multics system (written in PL/I), and MCP (Master Control Program) for the Burroughs B5000 written in ALGOL in 1961.)
In 1978, Brian Kernighan and Dennis Ritchie published the first edition of The C Programming Language.This book, known to C programmers as “K&R”, served for many years as an informal specification of the language. The version of C that it describes is commonly referred to as K&R C. The second edition of the book covers the later ANSI C standard.
K&R introduced several language features:
- standard I/O library
- long int data type
- unsigned int data type
- compound assignment operators of the form =op (such as =-) were changed to the form op= to remove the semantic ambiguity created by such constructs as i=-10, which had been interpreted as i =- 10 instead of the possibly intended i = -10
Even after the publication of the 1989 C standard, for many years K&R C was still considered the “lowest common denominator” to which C programmers restricted themselves when maximum portability was desired, since many older compilers were still in use, and because carefully written K&R C code can be legal Standard C as well.
In early versions of C, only functions that returned a non-int value needed to be declared if used before the function definition; a function used without any previous declaration was assumed to return type int, if its value was used.
/* int */ other_function();
/* int */ calling_function()
register /* int */ test2;
test1 = some_function();
if (test1 > 0)
test2 = 0;
test2 = other_function();
The int type specifiers which are commented out could be omitted in K&R C, but are required in later standards.
Since K&R function declarations did not include any information about function arguments, function parameter type checks were not performed, although some compilers would issue a warning message if a local function was called with the wrong number of arguments, or if multiple calls to an external function used different numbers or types of arguments. Separate tools such as Unix’s lint utility were developed that (among other things) could check for consistency of function use across multiple source files.
In the years following the publication of K&R C, several unofficial features were added to the language, supported by compilers from AT&T and some other vendors. These included:
- void functions (i.e. functions with no return value)
- functions returning struct or union types (rather than pointers)
- assignment for struct data types
- enumerated types
ANSI C and ISO C
During the late 1970s and 1980s, versions of C were implemented for a wide variety of mainframe computers, minicomputers, and microcomputers, including the IBM PC, as its popularity began to increase significantly.
In 1983, the American National Standards Institute (ANSI) formed a committee, X3J11, to establish a standard specification of C. X3J11 based the C standard on the Unix implementation; however, the non-portable portion of the Unix C library was handed off to the IEEE working group 1003 to become the basis for the 1988 POSIX standard. In 1989, the C standard was ratified as ANSI X3.159-1989 “Programming Language C”. This version of the language is often referred to as ANSI C, Standard C, or sometimes C89.
In 1990, the ANSI C standard (with formatting changes) was adopted by the International Organization for Standardization (ISO) as ISO/IEC 9899:1990, which is sometimes called C90. Therefore, the terms “C89” and “C90” refer to the same programming language.
ANSI, like other national standards bodies, no longer develops the C standard independently, but defers to the international C standard, maintained by the working group ISO/IEC JTC1/SC22/WG14. National adoption of an update to the international standard typically occurs within a year of ISO publication.
One of the aims of the C standardization process was to produce a superset of K&R C, incorporating many of the unofficial features subsequently introduced. The standards committee also included several additional features such as function prototypes (borrowed from C++), void pointers, support for international character sets and locales, and preprocessor enhancements. Although the syntax for parameter declarations was augmented to include the style used in C++, the K&R interface continued to be permitted, for compatibility with existing source code.
C89 is supported by current C compilers, and most C code being written today is based on it. Any program written only in Standard C and without any hardware-dependent assumptions will run correctly on any platform with a conforming C implementation, within its resource limits. Without such precautions, programs may compile only on a certain platform or with a particular compiler, due, for example, to the use of non-standard libraries, such as GUI libraries, or to a reliance on compiler- or platform-specific attributes such as the exact size of data types and byte endianness.
In cases where code must be compilable by either standard-conforming or K&R C-based compilers, the __STDC__ macro can be used to split the code into Standard and K&R sections to prevent the use on a K&R C-based compiler of features available only in Standard C.
C99 introduced several new features, including inline functions, several new data types (including long long int and a complex type to represent complex numbers), variable-length arrays, improved support for IEEE 754 floating point, support for variadic macros (macros of variable arity), and support for one-line comments beginning with //, as in BCPL or C++. Many of these had already been implemented as extensions in several C compilers.
C99 is for the most part backward compatible with C90, but is stricter in some ways; in particular, a declaration that lacks a type specifier no longer has int implicitly assumed. A standard macro __STDC_VERSION__ is defined with value 199901L to indicate that C99 support is available. GCC, Solaris Studio, and other C compilers now support many or all of the new features of C99.
In 2007, work began on another revision of the C standard, informally called “C1X” until its official publication on 2011-12-08. The C standards committee adopted guidelines to limit the adoption of new features that had not been tested by existing implementations.
The C11 standard adds numerous new features to C and the library, including type generic macros, anonymous structures, improved Unicode support, atomic operations, multi-threading, and bounds-checked functions. It also makes some portions of the existing C99 library optional, and improves compatibility with C++.
Historically, embedded C programming requires nonstandard extensions to the C language in order to support exotic features such as fixed-point arithmetic, multiple distinct memory banks, and basic I/O operations.
In 2008, the C Standards Committee published a technical report extending the C language to address these issues by providing a common standard for all implementations to adhere to. It includes a number of features not available in normal C, such as fixed-point arithmetic, named address spaces, and basic I/O hardware addressing.